After-sales Service: | Provide on-Site Maintenance |
---|---|
Warranty: | 1years |
Heating Mode: | Transmission |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
After the air been filtered and heated the air enters into the air distributor on the top of the dryer. The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Throug the very short time of contacting the heat air,the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
Model
|
GK-15
|
GK-30
|
GK-50
|
GK-100
|
Max capacity
|
1500-2000 ml/h
|
3000 ml/h
|
5000 ml/h
|
10000 ml/h
|
Temperature range of inlet air
|
40ºC ~ 300ºC
|
30ºC ~ 300ºC
|
140°C ~ 300°C
|
50°C ~ 300°C
|
Temperature range of outlet air
|
40ºC ~ 140ºC
|
30ºC ~ 140ºC
|
80°C ~ 90°C
|
30°C ~ 150°C
|
Spray system
|
Two-fluid nozzle
|
Centrifugal nozzle
|
Centrifugal nozzle
|
Centrifugal nozzle
|
Precision of temp
|
±1 ºC
|
|||
Dryer time
|
1.0 ~ 1.5 S
|
|||
Speed of squirt pump
|
50 ~ 2000
|
3000
|
5000
|
10000
|
Nozzle size
|
0.5/0.7/0.75/1.0/1.5/2.0mm
|
\
|
\
|
\
|
Spray direction
|
Downwards co-current
|
|||
Heater Power
|
3KW 220V
|
|||
Total power
|
10KW 380V
|
|||
Heat source
|
Electric
|
Suppliers with verified business licenses